Oxygen Scavengers
Water additives that chemically remove dissolved oxygen to prevent oxygen pitting corrosion in boiler systems, as well as other systems where dissolved oxygen is not desired. These chemistries are engineered to greatly increase the service life of your process equipment with or without the aid of mechanical oxygen separation via deaeration. We have organic and non-organic solutions, as well as FDA and USDA approved formulations.
Dispersants
All organic polymer formulations and nonorganic/ organic blends designed to prevent the buildup of solid deposition on heat transfer surfaces. Many compounds found naturally in water are inversely soluble with temperature, dispersants work to stabilize the solubility threshold of these compounds in the water to increase achievable cycles of concentration and to fluidize sludge buildup. The result being cleaner heat transfer surfaces, lower energy costs, and water savings due to reduced blowdown frequencies.
Defoamers
Silicon based defoamers are not compatible with most boiler systems. We produce several defoamers that work specifically in boiler systems to prevent carryover from high OH alkalinity, condensate contamination, or any other source of surface active modifiers.
Ion Exchange Resins
Pretreatment media for the replacement and/or the removal of dissolved solids in the makeup water, thereby reducing the need for chemical treatment in the system water.
Condensate Corrosion Inhibitors
Condensate lines are extremely prone to corrosion. Carbonic acid buildup from dissolve CO2 will depress the pH of the condensate and gouge channels at the bottom of pipes. Oxygen pitting can occur where barrier films are not present in older steam/condensate systems where leaks are present. Corrosion products can interfere with and contaminate plant processes. Our steam and condensate formulations stop and prevent these problems from occurring.
Cleaners + Descalers
Systems that have been neglected will buildup corrosion products and scale. Wetting and penetrating agents are designed to reduce the surface active properties of the water so that it can interface more efficiently with solid depositions, thereby loosening them from system surfaces so they can be removed through filtration, or blowdown. Descaling and Chelating agents remove scale and corrosion products by interacting on a molecular level with the compounds to pull them back into the water phase. Our line of cleaners and descalers are each designed to remove specific forms of deposition, and many of our formulations are a synergistic blend of surfactants, chelants, and descalers designed to work at maximum efficiency.